How To Flash CF-Auto-Root File To Samsung Galaxy Devices For Rooting

How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting


    In this post will use CF-Auto-Root made by Chainfire to gain root access on Android devices. Not only CF-Auto-Root can do Rooting against the Android Devices, but still much more to do, such as RootGeniusiRootKingRootMobileGoKingorootOne Click Root, and SRSRoot, these tools are designed to perform several functions such as Rootingflash ROMflash KernelRemove Ads in AppsBooster DeviceUninstall Preinstalled AppsRemove BloatwareUnlock ScreenDownload ROM and others.
    Some Tools at the top will require a PC to a place they walk, if you do not have a PC, you can do Rooting on your Android device without a PC, an application that you can use for Rooting Without PC is KingRoot Mobile360Root MobileiRoot MobileRootGenius MobileKey Master RootKingoroot MobileTowelRoot, and FramaRoot.

All right, go straight to the point, namely Root Samsung Galaxy Devices using CF-Auto-Root, follow the steps as below:

Preparation:
  1. Make sure your Samsung Galaxy have a battery 30-50% to do the Rooting process.
  2. Prepare a USB cable to connect your Samsung Galaxy device to your computer.
  3. On your Samsung Galaxy device, turn on USB Debugging Mode and OEM Unlock.

Stage Flashing CF-Auto-Root:
  • Download and install Samsung Android USB Driver on your computer, which serves to enable the computer to recognize your Samsung Galaxy device.
  • Download and install 15 Seconds ADB Installer tool on your computer, whose function is to allow you to enter into Download Mode your Samsung Galaxy automatically.
  • Download and extract the file CF-Auto-Root for Samsung Galaxy on your computer:
Caution: If you do not have a Android Version and Build Number as Samsung Galaxy in the table above, then do the Rooting process through TWRP / CWM Recovery Mode. See how Rooting Through Recovery Mode under the posts.
  • After you extract the files CF-Auto-Root, you will see several files as below.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

  • Now connect the Samsung Galaxy device to your computer using a USB cable.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

  • After that, you need to enter into Download Mode, to do so, open a Command Prompt on your computer, and then type the command: adb reboot download
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

(The command will bring your Samsung Galaxy device into Download Mode)

Caution: Make sure your Samsung Galaxy device is connected properly to the computer so that the computer can recognize or detect the presence of your Samsung Galaxy device.
  • If everything goes smoothly, it will display the message Warning on the screen of your Samsung Galaxy device. In this situation press Volume Up to continue. If you want to cancel this process, press the Volume Down button to restart your Samsung Galaxy device.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

  • If you choose to continue, then there will be writing Downloading on the screen of your Samsung Galaxy device.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

  • Now open the file Odin3 on your computer, Odin3 will detect your Samsung Galaxy device if your device is properly connected using the USB cable. If Odin3 successfully detects your Samsung Galaxy device, then there will be a message Added in the message field.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

  • After that, now click on the button AP or PDA existing in Odin3 application, and then navigate to the file CF-Auto-Root.tar.md5.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

  • After that, now click on the Start button in Odin3 application to make the process quick Rooting on your Samsung Galaxy device using CF-Auto-Root.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

  • Now you just need to wait how fast the Rooting process is completed, so that you see the message Pass! on the green box as shown below, indicating that the device Samsung Galaxy You have successfully Rooted.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

  • Once the flashing process is completed, then the Samsung Galaxy your device will reboot automatically.
  • Once the yor Samsung Galaxy device restart, you will find the application SuperSU on your Samsung Galaxy application menu as in the picture below.
How To Flash CF-Auto-Root File To Samsung Galaxy Devices for Rooting

Optional: You can also verify if you need it, whether your device is actually already Rooted or not using the application Root Checker.

0 Response to "How To Flash CF-Auto-Root File To Samsung Galaxy Devices For Rooting"

Post a Comment