How To Root LG G Vista
Minggu, 19 April 2015
Tulis Komentar
At this post, I'll give you two ways to do Rooting for your LG device. How to unity would seem easy because it will use the Tool LG_One_Click_Root made by avicohh are devoted only to the LG and the second way to use tools which consist of multiple files like (busybox and UPDATE-SuperSU.zip).
Rooting is actually to perform the android device, not only on the tool in this post who can do it, but it's still much more to do, like RootGenius, iRoot, MobileGo, Kingoroot, KingRoot, One Click Root, SRSRoot and other tools.
In the tools I mentioned above will need a PC to a place they ran, if you do not have a PC, you can use How Root Without a PC using the application KingRoot Mobile, RootGenius Mobile, iRoot Mobile, 360Root Mobile, Kingoroot Mobile, Key Master Root, TowelRoot, FramaRoot, and other applications.
Okay, now back to the topic of discussion, to rooting on your LG device, please do the steps as follows:
HOW TO ONE
Devices confirmed working with root method (If your device isn't listed it's most likely still supported)
- LG F60 (all variants)
- LG Tribute (all variants)
- LG G2 (all variants)
- LG MS395/D393
- LG G3 (all variants)
- LG L90 (all variants)
- LG Transpyre
- LG Volt (LS740)
- LG G Flex 2
NOTE: Do not attempt this on devices with 5.1.1 , at the time this method was posted it worked on many firmware 5.0.2 and below. Please confirm if the device you are successful in the root.
- On your LG Android Device, enable USB Debugging mode.
- Download and install LG Android USB drivers on your computer.
- Download and extract the file LG-Root-Tools on your computer.
(If you want to renew SuperSU file, you can get it here.)
- After that, connect your Android device to the computer using a USB cable.
- In the LG-Root folder-Tools, open a Command Prompt, how to press the Shift key and right click, then select "Open command window here"
- To make sure your Android device is connected to the computer, type the command: adb.exe devices
- Now, you need to enter multiple files (busybox, lg_root.sh, and UPDATE-SuperSU-v2.46.zip) to your Android device. Do I give this command at a command prompt:
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp
- To continue, your Android device need to boot into Download Mode, give this command into the command prompt: adb.exe reboot bootloader
- Once you are on the Android device Download Mode, now double click on ports.bat (This will give us how many devices connected COM port), Command prompt window will appear and detect any number of COM ports.
- If you already know what COM port your device is, please close the Command Prompt ports.bat.
- Back to previous command prompt window and issue the command:
Send_Command.exe \\.\COM4
(Note: COM4 is the port you are)
- Lastly, if the commands above goes well, then now issue the command:
sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox
- After that, remove the battery to exit the Download Mode, or by typing the command: fastboot reboot
- Now you will see SuperSU application on your android device application menu.
BOTH WAYS
Devices confirmed working with this method (If your device isn't listed it's most likely still supported)
- LG G3 (all variants)
- LG G3 Beat
- LG G2
- LG G2 Mini
- LG G Pro 2
- LG G Pad
- LG F60
- LG L90
- LG Tribute
- LG Spirit
- LG Volt
- LG G Vista
This method using a tool made specifically for Rooting the device LG, his name is LG_One_Click_Root by avicohh, this tool works on Android 4.4.x Kitkat, 5.xx Lollipop, and will also be developed for Android 6.xx Marshmallow.
- Download and Install LG USB Driver on your computer, if you do not do it.
- Download file LG_One_Click_Root (then double-click to extract) on your computer.
- On your Android Device, enable USB Debugging Mode, Go to Settings > About Phone > Software Information and tap build number until you are presented with "You are now a developer" Exit back to Settings main screen. In Developer Options enable USB Debugging (Some devices require enabling PTP for debugging to work)
- After that, connect your Android device to the computer using a USB cable.
(make sure your Android device is actually connected to a computer)
- After that, double-click on the file and wait LG_One_Click_Root.exe rooting process is completed.
- Now you will see SuperSU application on your android device application menu.
Resolving Problems
- If the phone not recognize, try to switch between MTP and PTP options.
- If you got "MSVCR100.dll is missing" error, install Visual C++ Redistributable.
(64 bit users, also install this file and not the 64bit version)
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
Belum ada Komentar untuk "How To Root LG G Vista"
Posting Komentar
We hope you can leave comments about this post, so that it will be an evaluation material for us to make a better article for the future.
Report if there is an inactive link by commenting, we will immediately make improvements to the link.