How To Root Samsung Galaxy Note 3 And Install TWRP Recovery

    In this post will use CF-Auto-Root made by Chainfire to gain root access on Android devices. Not only CF-Auto-Root can do Rooting against the Android Devices, but still much more to do, such as RootGenius, iRoot, KingRoot, MobileGo, Kingoroot, One Click Root, and SRSRoot, these tools are designed to perform several functions such as Rooting, flash ROM, flash Kernel, Remove Ads in Apps, Booster Device, Uninstall Preinstalled Apps, Remove Bloatware, Unlock Screen, Download ROM and others.

    Some Tools at the top will require a PC to a place they walk, if you do not have a PC, you can do Rooting on your Android device without a PC, an application that you can use for Rooting Without PC is KingRoot Mobile, 360Root Mobile, iRoot Mobile, RootGenius Mobile, Key Master Root, Kingoroot Mobile, TowelRoot, and FramaRoot.

All right, go straight to the point, namely Root Samsung Galaxy Note 3 Devices using CF-Auto-Root, follow the steps as below:

Preparation:

1. Make sure your Samsung Galaxy Note 3 have a battery 30-50% to do the Rooting process.
2. Prepare a USB cable to connect your Samsung Galaxy Note 3 device to your computer.
3. On your Samsung Galaxy Note 3 device, turn on USB Debugging Mode and OEM Unlock.

Stage Flashing CF-Auto-Root:

• Download and install Samsung Android USB Driver on your computer, which serves to enable the computer to recognize your Samsung Galaxy Note 3 device.
• Download and install 15 Seconds ADB Installer tool on your computer, whose function is to allow you to enter into Download Mode your Samsung Galaxy Note 3 automatically.
• Download and extract the file CF-Auto-Root for Samsung Galaxy Note 3 on your computer:

Caution: If you do not have a Android Version and Build Number as Samsung Galaxy Note 3 in the table above, then do the Rooting process through TWRP / CWM Recovery Mode. See how Rooting Through Recovery Mode under the posts.

• After you extract the files CF-Auto-Root, you will see several files as below.

• Now connect the Samsung Galaxy Note 3 device to your computer using a USB cable.

• After that, you need to enter into Download Mode, to do so, open a Command Prompt on your computer, and then type the command: adb reboot download

(The command will bring your Samsung Galaxy Note 3 device into Download Mode)

Caution: Make sure your Samsung Galaxy Note 3 device is connected properly to the computer so that the computer can recognize or detect the presence of your Samsung Galaxy Note 3 device.

• If everything goes smoothly, it will display the message Warning on the screen of your Samsung Galaxy Note 3 device. In this situation press Volume Up to continue. If you want to cancel this process, press the Volume Down button to restart your Samsung Galaxy Note 3 device.

• If you choose to continue, then there will be writing Downloading on the screen of your Samsung Galaxy Note 3 device.

• Now open the file Odin3 on your computer, Odin3 will detect your Samsung Galaxy Note 3 device if your device is properly connected using the USB cable. If Odin3 successfully detects your Samsung Galaxy Note 3 device, then there will be a message Added in the message field.

• After that, now click on the button AP or PDA existing in Odin3 application, and then navigate to the file CF-Auto-Root.tar.md5.

• After that, now click on the Start button in Odin3 application to make the process quick Rooting on your Samsung Galaxy Note 3 device using CF-Auto-Root.

• Now you just need to wait how fast the Rooting process is completed, so that you see the message Pass! on the green box as shown below, indicating that the device Samsung Galaxy Note 3 You have successfully Rooted.

• Once the flashing process is completed, then the Samsung Galaxy Note 3 your device will reboot automatically.
• Once the yor Samsung Galaxy Note 3 device restart, you will find the application SuperSU on your Samsung Galaxy Note 3 application menu as in the picture below.

Optional: You can also verify if you need it, whether your device is actually already Rooted or not using the application Root Checker.


As I said in the first paragraph concern, if Android Samsung Galaxy Note 3 you do not allow it to do Rooting using CF-Auto-Root, then you can do it through CWM / TWRP Recovery Mode. To do this, follow the step by step below.

• Requirements: Make sure USB Debugging Mode and OEM Unlock Samsung Galaxy Note 3 device is turned Enabled.
• Download and install Samsung Android USB Driver on your computer. (Skip this step if you have already done so)
• Download and extract the file Odin3 Downloader on your computer as a tool to do Flashing Custom Recovery (CWM/TWRP) Recovery on your Samsung Galaxy Note 3 device.
• Download file Custom Recovery (TWRP/CWM) Recovery on your Samsung Galaxy Note 3. Customize with your Samsung Galaxy Note 3 device model.
• To do Flashing TWRP Recovery on your Samsung Galaxy Note 3 device, follow the steps in How To Install CWM or TWRP Recovery And Rooting Samsung Galaxy Note 3 Devices.

Credit Links

https://autoroot.chainfire.eu

Related Post